EasyVoxBox EVB-0.013 is released
EVB-0.013 Release Notes
This is a major release.
EVB-0.013-i386.iso download page
Updates & Additions:
* Asterisk 1.4.20.1
* Zaptel 1.4.10.1
* FreePBX 2.4
* VtigerCRM 5.0.4 with click to dial
* Webmin
* EVBOS1 - A remastered version of Centos 5.1 with the current updates.
Installation:
Download the ISO file and burn to a cd. Set your PC bios to 1st boot from CD.
Once the CD has booted, you will see the EasyVoxBox Installation Menu. Press
return to install EasyVoxBox. CAUTION!! All files on your hard disk will be
deleted.
You will be prompted for timezone and root password during the OS install.
When the EVBOS has completed you will see a screen that says reboot. Remove
the CD and press enter to reboot. The install will take 20-30 min and will
reboot a few times.
Once finished (at the login prompt), login as root (using the password that
you entered during the install). You will see the ip number and mac address of
the machine at the top of the command prompt.
Browse to this IP from another system using Firefox. Go to (Admin ==> PBX
Setup) and then click on the orange bar to reload FreePBX. Reboot the system
by going to (System ) and click on reboot. You are now ready to begin
configuring the EasyVoxBox PBX system.
Passwords:
The system comes with the access control turned off. To enter the access
control section, use user: easyvoxbox and passwd: password
To access Samba use user: root and passwd: (the root password that you
selected during the install)
Default login for Vtiger is user: admin, passwd: admin
Default login for Webmin is user: root and passwd: (the root password that you
selected during the install)
===========================================
For more information go to
http://easyvoxbox.org
- mark's blog
- Login or register to post comments
Comments
Unable to Install EVB-0.013 ISO - Solved
Please disregard my previous posting with regard to not being able to successfully install EVB-0.013 ISO. It turns out that a rather long delay occurs in the process from when the installation script displays the “Retrieving Installation Information” screen to when it actually displays the progress screen stating that a check for dependencies is in progress. In my case, this took nearly 10 minutes, leaving me with the impression that the installation process had froze.
Sorry for the false alarm!
Bill
Unable to Install EVB-0.013 ISO
Hello:
I am unable to successfully install EVB-0.013 from the ISO disk posted on the website. When I run the CD it does boot and offers the initial installation choices.
Anaconda loads when I press to select the entire system installation choice. It probes and loads a video driver, prompts for the UTC and local time zone information, prompts for the root password, and then displays “Retrieving Installation Information” then just freezes with a blue background screen with CentOS displayed in the upper left hand corner.
I have burned two separate EVB-0.013 ISO CD’s and have tried both of them on two separate computers that are known to load and install EVB-0.011 free of errors and does not stall or freeze up during the process. I have also tried to install just the OS alone but get the same results. The process leaves Grub installed on the HD but nothing else. Any suggestions would be appreciated.
Thank you,
Bill